Mobility express

[a6z69@yahoo.com]

Dear Mates,

                  Kindly support me We have cisco access points 2802, But we don't have wireless controller.

                  Must transfer IOS from light weight to mobility express after we transferred and took right configuration and IP from DHCP all thing is right about configuration when we try to access GUI don't open.

after search we find this command must write at controller CLI ( config network webmode enable ) / save config .

Still GUI don't work any one facing this issue or have any solve.

[jagan.chowdam]

Can you share "show network summary" command output.

config network webmode enable - This command allows users to access the controller GUI using "http://ip-address." The default value is disabled. Web mode is not a secure connection.

config network secureweb enable - This command allows users to access the controller GUI using “https://ip-address” .The default value is enabled. Secure web mode is a secure connection.

You should disable "config network webmode enable" for security purposes. 

***Please rate all helpful posts***

Jagan