11-28-2014 03:54 AM - edited 07-05-2021 02:02 AM
Hi All,
Today i am facing issue with mobility group. i checked and found control and data path is down on foreign controller.I am able to ping anchor controller. Required ports are open on firewall but mping and eping fails. Any idea whats wrong. On Anchor controller, i have 6 foreign controller configured and among these 1 alone not working. Previously all are working fine and there is no changes made on network or firewall end today.
WLC Version details Forign Controller :- 7.6.120.0
WLC Anchor Controller :- 7.6.120.0
11-28-2014 05:52 AM
I assume the anchor status is down on both controllers ?
If if the MAC addresses and IP address are correct and fw rules are good then I would do a few things ..
Reboot controller
open fw with no resections
thats what hat I would do ..
11-28-2014 11:52 AM
7.6.120.0 is not that good, go for 7.6.130.0 which is the recommended code in 7.6 train.
HTH
Rasika
**** Pls rate all useful responses ****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide