Moving AP's from the Default AP-Group using Controller CLI Interface

[Mark Shuck]

I´m looking for the CLI command to assign an AP to an AP-Group . So the AP's moves from the default AP-Group to the new assigned AP-Group, I can I can do this thru the GUI but would like to do this using the CLI of the controller, when I rename the AP's with a script that I write after inventorying them.    

Thanks to all who have any knowledge on this CLI command.

[Sebastian Pusta · Accepted solution]

Hi Mark,

(Cisco Controller) >config ap group-name MY_GROUP MY_AP_NAME

You can find out more here:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71477-ap-group-vlans-wlc.html#c3