10-31-2012 11:21 AM - edited 07-03-2021 10:57 PM
NCS 1.1.1.24 (PRIME-NCS-VAPL)
5508-50 WLC 7.0.235.3
I had to re-IP this WLC onto another management vlan. Prior to the IP change and code upgrade I removed the WLC from NCS.
When attempting to re-add the WLC to NCS, I finally found the it in Configure>Unknown Devices. Now NCS is showing the Device Type as Unknown, and Inventory Status Detail as Unsupported device, and reachable.
What am I missing???
Thanks!
Solved! Go to Solution.
10-31-2012 11:23 AM
Try using snmp v2 and or v3. Seems to work for me at times.
Sent from Cisco Technical Support iPhone App
10-31-2012 11:23 AM
Try using snmp v2 and or v3. Seems to work for me at times.
Sent from Cisco Technical Support iPhone App
10-31-2012 11:32 AM
I only enable v3. Adding a v2 community didn't help. Then I noticed NCS wasn't holding onto the v3 auth protocol. Re-entering that seems to have cleared things up.
Thanks for the tip!
10-31-2012 03:52 PM
Yeah... I dot know why it's like that but removing the WLC and adding it back using snmp v2 or v3 fixes the issue but then I have some WLC using v2 and others using v3:)
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide