Need assistance in configurating Cisco AP 1142N-K9

[Legust321]

I will welcome any suggestion on how to do the following configuration on the Cisco AP 1142N-K9:

- intruction on how to do initial configuration for IP address assignment to the AP (to be able to continue with the ethernet confirguration via the browser)

- The command to activate the radio module (which is disable by default)

Thank in anticipation to your assistance.

[glen.grant · Accepted solution]

  Here ya go , all the info 

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1.html

[Legust321]

Thanx a lot Glen, that helped a lot in solving my issue.

Kind Regards.