Hello guys good nigh I have another question. I'm going to migrate a WLC 4400 for 5508. I'm worry about this migration because I have some AP on remote sites in mode H-REAP. So i was thinking in a method to migrate this AP's. I know that in my 5508 I...
HelloI have two 5504 Controller. Original Liceses 100 per Controller. At the beginning the Controllers were running standalone as a Primary and secondary in a Mobility domain. Now they are running in a HA Pairing mode. One Controller as the Primary a...
Hello,I had deployed Fifty 1131AG AP with Cisco 5508 Controller, the problem is some APs giving a orange ligth and some of them didn't flashing "there Led is Off" , Have you any idea about this issue , any suggestion is welcome
Greetings,We've been having issues for a while with these Aironet 1140's. We have two of them in the office and the issue is similar to the first issue displayed in this post: https://supportforums.cisco.com/docs/DOC-26228The only difference is that ...
Hello,I have a standalone AP(AP1261N) which is configured with 3 SSIDs.I would like to prioritize any data flow on SSID 1 for example so that users on SSID 1 are always functional independent on what is happening on the other SSIDS.Then have the SSID...
Hello Everyone,I wanted to extend my wireless network in production area.so what i did:Core switch-----------------WLC ! ! ! !Edge Switch-----------------APStep 1: WGB : 10.47.84.61 , one machine is physically connected to WGB wit...
Hello,I have not been able to find any documents that state the Ingress Protection Rating for Cisco's outdoor antennas, such as the AIR-ANT2506. Does anyone have current information on this? I'll put a request to Cisco pre-sales, and IF i get a respo...
Hi,Does anybody know what is the maximum number of associated clients that supports a 1552I?Has anybody tried with simultaneous streaming of multiple clients, how many will run?Thanks
WLC 5500 canr detect LAP1040 either in the same vlan or on different vlan . i attached the scenario and configuration on the file .
Just got the 891W and 3 of the airs. Have the basic wired portion of the router done,internet connectivity, basic firewall, have not configured the built in wireless yet. I added the onboard PoE kit for the 3 air's, plugged the first one in to port 3...
Hello,Recently i implanted the AP SSO in WiSM2 and it is working fine in my client and the modules are in the 6500 in VSS configuration.I have another environment with 7500 where the client have two 7500 very distant one from another.In this situatio...
We have a permanent guest account setup on our 2504 WLC in one location, much as in our other multiple sites with 4400, 5500 and 2500 series controllers. In this particular location, the guest account is disappearing from the controller about every 1...
Hi,I have a site with 3 AP. all of them are 1042N model.I created a new map for this site, and the heat map is shown. the problem is that no client displayed on the map. This error came up on the location server event log - Failed to create heat map ...
Dear Al,Can anyone explain site survey for the existing setup..? As per my understanding, we need to do active survey for the first time to find the coverage holes and the second time to overcome the issues by new RF planning/adjusting the AP locatio...
Hi! There is a question about an aggressive load balancing. In this mechanism will work Intra-Controller Roaming? Does balancing with associated clients or it only happens when you connect to an access point?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM | ||
| 08-06-2026 09:29 PM |
| User | Count |
|---|---|
| 4 | |
| 4 | |
| 1 | |
| 1 | |
| 1 |
