Need Help mesh

[Kamran Mustafayev]

I have a few questions

1) how to config mesh network on standalone cisco ap using 5 ghz, just give me configs please

2) 802.11n feauter enabling command

thank you

[Surendra BG]

1>> Mesh network cannot be built using AUtonomous APs.. MESH is a different design..

The below link may help you

http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html

2>> 802.11N runs on top og G and A and it alone cant drive..

Please mkae sure you are using below configs

WPA 2 Personal or WPA2 Enterprise with AES as the Encryption + WMM Enabled + All MCS rates enabled.

Regards

Surendra

[Surendra BG]

2>> 802.11N runs on top og G and A and it alone cant drive..

Please mkae sure you are using below configs

WPA 2 Personal or WPA2 Enterprise with AES as the Encryption + WMM Enabled + All MCS rates enabled.

or

Open auth + no encryption + WMM Enabled + All MCS rates enabled.

Regards

Surendra

[Amjad Abdullah]

although mesh is not available with autonomous, you can use WGB if you want to bridge the communication with the wired side.