Need latest autonomous-Firmware for EOL device: Aironet 3502

AndreasKarnik5940 · ‎04-21-2021

Leo Laohoo · ‎04-21-2021

3500 Autonomous IOS can be found HERE.

AndreasKarnik5940 · ‎04-21-2021

I know this location.
But to download the firmware you need a service contract.
As the device is EOL it is not possible to make a new service contract.

I was supposed to write to the community by cisco contract support.

Leo Laohoo · ‎04-21-2021

@AndreasKarnik5940 wrote:
I was supposed to write to the community by cisco contract support.

Just want to be certain the intention, you are not asking us to commit copywrite infringement, are you?

Rich R · ‎04-22-2021

As I just answered on another post - it is illegal to share Cisco licensed software - that's what Leo is saying, so you should not ask us to do that!

You can try approaching the Cisco reseller you purchased the AP from for assistance.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390