01-21-2021 09:48 AM - edited 07-05-2021 01:03 PM
I've had a Cisco WiFi network up for about 3 years. My organization purchased a bundle a couple of years before that that came with 2 Cisco 2500 series controllers, and 15 AP's. I guess it was just blind luck that during the initial deployment all the AP's simply worked. We initially deployed 10 AP's, and have recently installed the other 5 from that order. Three of the AP's are universal AP's (AIR-AP3702I-UXK9 to be exact), and the LED's are flashing Blue Red off. After digging into these AP's, I realized that these AP's need to be primed, but the app was removed from the Apple Store in August 2020 (we are an iPhone only shop). I was able to locate the APK for Android, but I don't have access to an android phone that is on a data plan to be able to do the three way handshake with Cisco and the AP for AirProvision to work.
Is there any hope for getting these AP's to work? I know that I have read many manuals about them, and reviewed many forum posts that the only want to prime these AP's is via the app, or via another AP that had been Primed. I think I have a lead on a Primed AP, but is there any CLI magic that can be done to be able to set the Regulatory Domain on these AP's?
01-21-2021 10:48 AM
You can connect them close to one of the other UX ap's that are up and running and they should get primed OTA.
01-21-2021 11:04 AM
That's the problem. I don't have any of these AP's that have been primed, so they are not picking up the prime command. Unless I can ether get the app on my phone, or borrow a primed AP, these are just expensive paperweights. I'm talking to friends that may have an AP that was primed, but so far I haven't had any luck.
01-21-2021 12:11 PM
I don't have any iDevices, but what happens if you open this URL: https://apps.apple.com/mr/app/cisco-airprovision/id942729078 (found on google)?
Otherwise somebody could maybe lend you an Android tablet or phone to provision one?
Lastly I'd try to contact Cisco with the old order number or otherwise serial numbers and ask if they do a hardware replacement, as they can't anymore be provisioned.
01-22-2021 10:11 AM - edited 01-22-2021 10:43 AM
@patoberliI tried that link out of curiosity but my iPhone says "App Not Available. This app is currently not available in your country or region." Maybe it might work somewhere else.
Maybe try this @wade.hoover: https://github.com/vbeskrovny/Cisco-Universal-AP and thank that guy profusely if it works
01-31-2023 09:36 AM
I've got the same problem with some 2702 -UX AP's. AirProvision app is not available for Android nor iOS.
@wade.hoover : Did you find a solution?
Has anyone tried the procedure shared by @Rich R ?
02-01-2023 11:42 AM
02-28-2023 02:04 AM
Thanks @patoberli , you're right. I opened a TAC case and the solution is to replace the -UX AP's for other pre-provisioned.
Manual priming is no longer supported, the only alternative is using OTA if you have any previously primed AP (this is not our case). Thus, the UX domain APs must be replaced with equivalent domain-specific APs, as a solution.
CSCvw04567 https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvw04567
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide