Hello all.
My setup is a Cisco AP 1232 connected to a cisco switch, connected to a cisco router, connected to our DHCP server.
The AP has 2 VLANS and SSIDs, VLAN 1 for Employees and VLAN 2 for Guests. It also has an aditional VLAN for management, VLAN 3.
The APs BVI interface is configured inside the management VLAN.
VLAN 1 requires Radius authentication.
VLAN 2 is a key configured on the client.
When I connect to the SSID for VLAN 2 (guest) I get a good address from the DHCP pool and everything is swell.
When I connect to the SSID for VLAN 1 (employee) I verify it passes the Radius authentication and assoiates. It then times out trying to get a good address via DHCP and comes back with the defualt 169.blah.blah.blah.
Verified all VLANS are allowed to ride all trunks to/from the router.
Any ideas out there?