06-03-2015 04:20 AM - edited 07-05-2021 03:20 AM
Dear All,
I will much appreciate to let me know how to connect the Access point AIR-CAP2702 to the wireless controller 5508 I try a lot but the access point does not appear on the wireless controller.
many thanks and best regards,
Naser Ahmad
06-11-2015 04:50 AM
Console into the AP and in enable mode, enter the following:
1. capwap ap ip address <IP Address> <Subnet mask>;
2. capwap ap controller ip address <Management IP address of the WLC>
06-21-2015 09:53 PM
Thanks Leo,
Now the AP is reg to the WLC but I do have another question we are using RADIUS server in our AD server and all clients MAC add is registered how I can configure the WLC to use that RADIUS server and Authenticate with the RADIUS server.
regards,
Naser
06-22-2015 12:43 AM
Kindly read this: Configuring RADIUS
06-22-2015 01:07 AM
Thanks I read that but couldn't find anything that weather this WLC is compatible with Microsoft Radius server or not?
06-22-2015 01:42 AM
It is compatible with MS.
06-22-2015 01:57 AM
But I couldn't find configuration steps on the document that you sent can you tell me the steps to configure it.
06-22-2015 02:38 AM
06-22-2015 03:30 AM
thanks could you send me this for 5508 model as it is completely different than this.
regards,
06-22-2015 04:36 AM
Just do a search on Google for this. There are many examples on how to do this with the WLC's.
-Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide