Oid to view clients connected to AP

[mplaksin0]

Hello, anyone can help me or know an implementation of an OID to view the number of connected clients per Access-Point? I am using a 5508 WLC

Thanks

[mplaksin0]

Finaly i solve the probleme using 1.3.6.1.4.1.14179.2.1.1.1.38.(APIndex)

And i get the index from SNMPv2-SMI::enterprises.14179.2.1.1.1.2.1 = STRING:

[Amjad Abdullah · Accepted solution]

+5 for resolving your own problem

Sent from Cisco Technical Support iPad App

[George Stefanick]

LOL @ AA ... +5

Keep up the good work

[Amjad Abdullah]

+5 to you as well George. ^_^

[enrico.becchetti]

Which is solution for this issue ?

Thanks

[cesarhenao]

Hi I have the same problem but I have not been resolved I can help out?

I'm trying to get this thing with Solar Winds

[lilieli]

Please find article on this website which explain and give a Template to use for monitoring WLC with PRTG.

https://kb.paessler.com/en/topic/75561-how-can-i-monitor-a-cisco-wlc-deployment-with-prtg

I am not good at writting code, but I would like to insert the solution propose by mplaksin.

Can someone be able to insert this OID 1.3.6.1.4.1.14179.2.1.1.1.38.(APIndex)

And i get the index from SNMPv2-SMI::enterprises.14179.2.1.1.1.2.1 = STRING:

into the Template?

This would answer all my needs of surveillance from my WLC. Thank you for your help!

[lilieli]

Please find article on this website which explain and give a Template to use for monitoring WLC with PRTG.

https://kb.paessler.com/en/topic/75561-how-can-i-monitor-a-cisco-wlc-deployment-with-prtg

I am not good at writting code, but I would like to insert the solution propose by mplaksin.

Can someone be able to insert this OID 1.3.6.1.4.1.14179.2.1.1.1.38.(APIndex)

And i get the index from SNMPv2-SMI::enterprises.14179.2.1.1.1.2.1 = STRING:

into the Template?

This would answer all my needs of surveillance from my WLC. Thank you for your help!

[Flavio Boniforti]

Hi. It's not working on a WLC 5508 with 8.2 firmware.

Any help on this?

Thanks,

Flavio.