11-30-2020 11:01 AM - edited 07-05-2021 12:50 PM
Is it possible to have both Open and Enhanced open (OWE) on the same WLAN?
Like how you can enable WPA2 and WPA3 on a WLAN, I would like to enable OWE and still support older clients that don't support WPA3 OWE.
Thanks!
Solved! Go to Solution.
11-30-2020 12:26 PM
Here is the CLI config options in AireOS
Assume you do it in AireOS based WLC
Rasika
11-30-2020 12:54 PM
This is the CLI equivalent of mapping those SSID, listed on the same URL
config wlan security owe-tm enable owe-wlan-id open-wlan-id
config wlan security owe-tm enable open-wlan-id owe-wlan-id
HTH
Rasika
11-30-2020 12:01 PM
No, it is not possible.
Enhanced Open Transition mode designed to work with two SSID, one with broadcast (open) & other with hidden (OWE), then they linked to each other to give smoother user experience.
See below post
https://mrncciew.com/2019/11/22/enhanced-open-part-2/
HTH
Rasika
*** Pls rate all useful responses ***
11-30-2020 12:21 PM
That's what I would like to implement.
There they did it via the GUI.
Are there any links you could provide for doing this via the CLI?
Thanks!
11-30-2020 12:26 PM
Here is the CLI config options in AireOS
Assume you do it in AireOS based WLC
Rasika
11-30-2020 12:41 PM
Thanks.
I saw that but it doesn't specifically say anything about the "transition" technology or how to link the regular open SSID to the new OWE SSID.
11-30-2020 12:54 PM
This is the CLI equivalent of mapping those SSID, listed on the same URL
config wlan security owe-tm enable owe-wlan-id open-wlan-id
config wlan security owe-tm enable open-wlan-id owe-wlan-id
HTH
Rasika
11-30-2020 01:47 PM
Thanks.
I'll give this a try soon.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide