Re: Outdoor Mesh 1522 not joining to WLC 2100

acharyr123 · ‎11-02-2008

I do have a outdoor mesh AP 1522. This is not joining to WLC 2100. Need help on this...

Plz find the error mesage:

=============================================

AP0021.56e4.5e00>en

Password:

*Nov 3 10:20:10.467: LWAPP_CLIENT_ERROR_DEBUG: Retransmission count for type (IMAGE_DATA) exceeded more than max(4)

*Nov 3 10:20:10.467: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

*Nov 3 10:20:10.471: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

*Nov 3 10:20:17.671: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Nov 3 10:20:26.575: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired

*Nov 3 10:20:26.575: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired

*Nov 3 10:20:26.575: %MESH-6-LINK_UPDOWN: Mesh station 0021.56e4.5efc link Down

*Nov 3 10:20:26.667: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER

*Nov 3 10:20:31.575: %MESH-6-LWAPP_RESTART: Mesh Lwapp re-started

*Nov 3 10:20:31.575: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

*Nov 3 10:20:31.579: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

*Nov 3 10:20:36.667: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER

% Password: timeout expired!

Password:

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

*Nov 3 10:20:44.275: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER

*Nov 3 10:20:44.279: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Nov 3 10:20:48.371: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.10.1.252, mask 255.255.255.128, hostname AP0021.56e4.5e00

*Nov 3 10:20:54.275: %LWAPP-5-CHANGED: LWAPP changed state to JOIN

examining image...

Loading file /c1520...

*Nov 3 10:22:56.463: %LWAPP-5-CHANGED: LWAPP changed state to IMAGE

% Password: timeout expired!

Password:

%Error opening (OK)archive download: takes 20 seconds

dennischolmes · ‎11-03-2008

What is your dns server. It looks as if your dns entry is set for the domain server at 255.255.255.255. The AP needs the address of the management interface on the controller resolved to CISCO-LWAPP-CONTROLLER. Also, what version of code are you running?

acharyr123 · ‎11-03-2008

Hi,

Ok..i will put the management IP in DNS..

The error that i am getting is

=============================================

"%Error opening (OK)archive download: takes 20 seconds".

=============================================