06-20-2009 11:31 PM - edited 07-03-2021 05:44 PM
Hi,
I have Two Offices at a distance of 3KM with line of site.
Can you advice outdoor wireless device model.
Both Sites are on different network
Office 1 : 192.168.1.0/24
Office 2 : 192.168.2.0/24
06-21-2009 02:50 PM
Try using directional antennas.
Cisco Aironet Antennas and Accessories Reference Guide
Cisco Aironet 2.4 GHz and 5 GHz Antennas and Accessories
Hope this answers your question.
06-22-2009 05:39 AM
Hi,
Have a look at the 1300 and 1400 bridges here:
http://www.cisco.com/en/US/products/ps5861/index.html
http://www.cisco.com/en/US/products/hw/wireless/ps5279/index.html
Hope this helps.
Regards,
Nagendra
06-22-2009 06:12 AM
Many Thanks.
In terms of configuration, do I need to have dedicated VLAN to connect both outdoor Access Point.
In principle Access Point should be connected to a Router at each office.
Can this be confirmed, any more suggestions keeping simple setup and yet secure.
06-22-2009 02:47 PM
Using directional antennaes, you can bridge the 2nd building. The point-to-point link can be a /29 subnet.
06-22-2009 10:31 PM
Hi,
Will the Bridge connect to Router or Switch.
I have different network on each office and now different network /29 for Bridges.
How the traffic will flow from one office to another office on different network.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide