PEAP-GTC with ACS 3.2 Appliance and RSA Secur-ID Token Server

[r.girard]

Hi experts !

Does somebody knows how to configure ACS 3.2 Solution Engine appliance for communicate with a RSA Secur-ID Token-Server V5.

After successfully activated PEAP on ACS 3.2 Solution Engine Appliance with a good certificate, clients cannot auhenticate the server.

Note : Certificate has been correctly generated and appears in the tab "Trusted Root Certification Authority" on the Client PC.

Thanks all for your precious help !

Rick

[mlambe]

I have this setup and working. Set up an external database connection on the ACS for a RADIUS server (not RSA) and setup your RSA server with the RADIUS shared secret. Check IP connectivity between both,and make sure that the RSA server is the first database to be queried. Here you are just using Radius to pass through the auth from the ACS to the RSA server.

[r.girard]

Hi Mark,

Thanks for your reply.

By chance, since 2 days all our configuration works fine, it was some mistakes both in the RSA Secur ID configuration and in the ACS.

Thanks again.

Regards, Rick