01-05-2006 07:35 AM - edited 07-04-2021 11:28 AM
Running IOS version 12.3(7)JA1 on AP1200 b/g, after turning off CDP on AP. AP failed to initiate power from the none Cisco POE switch. Please advice.
01-06-2006 02:31 AM
Hi,
does it work when CDP is turned on?
Martin
01-10-2006 09:18 AM
Hi Martin,
No it doesn't work. The reason is the non-cisco device switch doesn't support CDP. It does support IEEE and 802.3af.
Thanks
Murtada
02-01-2006 07:47 PM
Murtada,
The Cisco 1200 AP is not 802.3af compliant and will not work with a pure 802.3af switches. You should be able to add a PDPS800 which will receive power from an 802.3af switch and output 48VDC plus data to the 1200.The PDPS800 will need to be located near the 1200 AP. See URL below
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008039e541.html
Morty
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide