Wireless

Hi Sir,I have a WLC infrastructure in my company.I'm configuring a WLAN for vendors with 802.1x supplicants. User accounts will be created on the ACS or backend authentication server.Most of the vendors support WPA. Some only support WEP. Having said...

Greeting,When we use a Ghost server to do image upgrade on PCs, which brought down our entire wireless network. It only happens when the Ghost server use muilticast instead of unicast. All the network is on vlan 1. But this does not affect the wired ...

HelloI'm having a problem with authentication and I can't figure it out.I have Cisco Aironet 1100's for my AP's and I have them authenticate against a Windows 2003 Server as a radius server. To do that, I'm using IAS 2003 to authenticate against int...

When I create either an firware or config job, I complete all the steps, selecting devices, firware or config and schedule either now or in the future and when I get to the Save step, the page remains blank with "You are creating job: XXX" at the top...

Hola I have tried to update the ios of a cisco AP 1100 series and still has me the process by half and now does not work. Since I can recover the ios or install the new one?Thanks

Several months after upgrading our AP1230G units to IOS 12.3(8)JA2, we learned that they were intermittently failing to forwardbroadcast (and multicast) frames from the wired to the wireless side.The wireless customer typically notices it once wired ...

Hi,on the aironet access points there is a feature: PSPF - Publicly Secure Packet Forwarding. This feature blocks inter client communication. Is there a similare feature available for the WLC airespace products?RegardsJoerg

Hi,I currently deploy a Wireless Unified Infrastructure based on Airespace Technology.I provided a diagram in enclosure.I want to use the eap-peap authentication, based on Windows Logon/Password.My Wireless Client will use an Intel Wireless Adapter (...

Does anyone know the expected packet loss for broadcast packets in a wireless network?

Hi,Am currently having a problem with the new Nokia E-Series phones and I-Mates/IPaqs aswell where I try to connect to a WPA2, 802.1x, with CiscoSecure ACS and a WiSM, but keep getting prompted for username and password every 5 seconds (which doesnt ...

I have been looking for information on best practices/configuration examples on how to cluster two WiSMs in either one 6509 chassis, or one WiSM in one 6509, and the other in a separate 6509. THe 6509s are connected via HSRP and both are located at ...

We have 3 AIR-1232AG AP's setup in a controller-less enviornment that operate flawlessly with every wireless device we have with the exeption of one:Dell Wireless 1490 Dual Band WLAN Mini-Card running driver version 4.10.40 (the latest driver).After ...

Can anyone explain or refer a link about "Excluded Clients". I always see some clients are excluded with exclude reason "Identity Theft". What does this mean? How and in what situation does controller exclude a client? I could not find explanations o...

I'm using AP1000 and AP1200 series APs and am trying to configure Cisco Network Registrar to support DHCP option 43/60 dialog using NRCMD.. Thus far without too much success, has anybody done this?

Two 1100's are setup as a bridge, both connected to a 1100 running as a root-AP.A problem occurs when a client leaves the area where the root-AP is and goes to one of the areas where a bridge-AP is providing connectivity:no traffic is bridged. (Worka...