Power level of AP changing when we are rebooting AP

subodh goyal · ‎08-02-2023

I want AP to have power leve3 so i have selected Transmit power to 3 under Tx Power Level Assignment
but when AP is rebooting it is again changing to 4 and showing as global. Images attached.

Can anyone please confirm what can be the issue?

marce1000 · ‎08-02-2023

- Did you save the configuration on the controller after making changes ?

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

subodh goyal · ‎08-02-2023

Yes, i have saved a configuration

marce1000 · ‎08-02-2023

- As far as it might be related to buggy behavior , use a recent software version on the controller : 17.9.3 or above , if applicable ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

subodh goyal · ‎08-02-2023

WLC is running with latest software version 17.9.3

marce1000 · ‎08-02-2023

- It probably won't help but a configuration check could provide insights , use CLI show tech wireless ; feed the output into : https://cway.cisco.com/wireless-config-analyzer/

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Leo Laohoo · ‎08-02-2023

What firmware is the controller on at the moment?

subodh goyal · ‎08-02-2023

17.9.3

Rich R · ‎08-04-2023

Have you got "ap tag persistency enable" configured?

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390