08-03-2015 03:41 AM - edited 07-05-2021 03:40 AM
Can't do Audit and Refresh from Config and giving the Error: Access is denied..
See attached.
08-06-2015 10:16 AM
check the following link. It seems to me some bug issue.
Further more whats version your using for PI and do you did migration or its standalone PI ?
http://www.cisco.com/c/en/us/td/docs/wireless/ncs/1-0/release/notes/NCS_RN1-0-1.html
08-08-2015 01:06 AM
thank you, gohussai!
the version is:
Cisco Prime |
Infrastructure |
Version: 2.0 (2.0.0.0.294) |
08-10-2015 10:38 AM
1- First check credentials you are using to logon to PI [Use admin with full rights]
2- Change your Browser
3- Disable and enable auditing from PI console then use it via GUI.
For configuration and troubleshooting PI Audit check the following guide
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/administrator/guide/PIAdminBook/maint_network_health.html#62943
Let me know the result.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide