11-21-2012 11:18 AM - edited 07-03-2021 11:05 PM
Hi a i have this version Ap "c1200-rcvk9w8-tar.124-21a.JA2" and a WLC 5500. When i connect the ap to the network i can ping from ap to wlc and the wlc to ap, but the proccess of lwapp messages give errors on the Ap when the Ap try to download the image from wlc and could not join the wlc. why this could be? this is the info of the wireless lan controller.
11-21-2012 11:22 AM
What version of code are you running on the WLC? The 1200 isn't supported after 7.0
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp947842
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
11-21-2012 12:18 PM
where can i see the version that you ask on the gui of wlc without "show version" on cli?
11-21-2012 12:23 PM
On the WLC main screen shows the WLC code version.
Sent from Cisco Technical Support iPhone App
11-21-2012 12:41 PM
In the WLC, run the command "sh sysinfo" and this will tell you what version the WLC firmware is running on.
11-21-2012 05:33 PM
Since Leo Steve and Scott answered .. So will I !
If your 1200 only has a b radio it won't connect regardless.
Sent from Cisco Technical Support iPhone App
11-21-2012 05:39 PM
Since Leo Steve and Scott answered .. So will I !
All we need is Surendra and we can have a party.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide