08-25-2012 03:44 AM - edited 07-03-2021 10:34 PM
Hi i have a cisco air lap 1522 but i have problem with it! I cant use config command in cli ? And i cant assign ip address to ap please help me! Tnx
Sent from Cisco Technical Support iPhone App
08-25-2012 10:02 PM
Tnx! This wlc supported with air lap 1522? İt means that air lap can work with this WLC?
Sent from Cisco Technical Support iPhone App
08-25-2012 10:34 PM
One things i know that am i need wirelles control system(WCS) ? Or no the WLC is enough? Tnx alot
Sent from Cisco Technical Support iPhone App
08-25-2012 10:54 PM
The WLC is enough. WCS is used for monitoring and for management. WCS is pretty useful if you have more than one WLC so you can manage and monitor all of them from one location. But if you have only one WLC then that is it. No need for WCS.
AP 1522 is supported with all WLCs.
HTH
Amjad
You want to say "Thank you"? Don't. Just rate the useful answers, that is more useful than "Thank you".
08-25-2012 11:30 PM
when i purchase WLC i should connect it with ap phisycaly? İt means with wire?
Sent from Cisco Technical Support iPhone App
08-26-2012 01:00 AM
The AP should be able to reach the WLC. It is not necessary to connect it directly but they should be reachable to each other.
Check this config example, it should be useful for you:
HTH
Amjad
You want to say "Thank you"? Don't. Just rate the useful answers, that is more useful than "Thank you".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide