06-10-2005 10:51 AM - edited 07-04-2021 10:53 AM
Hi,
To solve some roaming problems with ap1210's with Ios 12.2(15)XR2 in our distribution center, Cisco has advised us to
upgrade to Ios 12.3(4)JA.
We have done that but after 5 days, we got complaints with associations to the ap's.
A reload solve the problem but after a few days the association-problem comes back.
I suspect the new ios-version but in the old version there was:
logging queue-limit 100 and in the new version there wasn't
In the new version there was:
logging snmp-trap emergencies
logging snmp-trap alerts
logging snmp-trap critical
logging snmp-trap errors
logging snmp-trap warnings
and in the old version there wasn't.
This could be the problem (memory overload or something like that ??).
Has anyone the same experience withe this Ios-version ??
Otherwise we are planning to downgrade.
Greets,
René
06-11-2005 02:52 AM
Rene,
Are you using a WDS?
If so is it an Aironet Device or WLSM?
Which IOS version if relevant is on the WDS?
Which type of authentication to the AP is taking place?
Regards
Miron
06-11-2005 05:29 AM
Miron,
Yes we're using a wds but not for fast secure authentication, just for gathering the radiotraffic and
to sent to our wlse where we've radiomonitoring enabled.
In the distribution center we got 13 ap1210's, from wich one of them is the wds-accesspoint.
All the 13 ap's have yet Ios 12.3(4)JA version.
Our authentication for the wireless-devices (which have the problem) is open with a WEP encription and ssid, on the 6509 we've an
access-list for securing.
Greetings,
René
06-13-2005 02:33 AM
We have also problems like this. We don't use WDS just WEP and MAC auth. We we traveling from one AP to a other the connection is lost. We have 8 AP 1210 and using WINDOWS CE clients.
How do you configure roaming?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide