Re: Problem

guahaha658 · ‎12-04-2024

Hello!

When attempting to change the DHCP server address for the Management VLAN on the WLAN controller, an issue or error occurs and the DHCP server address doesn't get saved. What should i do?

MHM Cisco World · ‎12-04-2024

Mgmt VLAN of WMI use dhcp?

That seem not correct at all

MHM

guahaha658 · ‎12-04-2024

at the management vlan i want to put the primary dhcp address

guahaha658 · ‎12-04-2024

Please help me!!

guahaha658 · ‎12-04-2024

This is what i have configured in WLC.

Flavio Miranda · ‎12-04-2024

@guahaha658

Attach your PacketTracer file here, it is easier to help you. Zip it first. And explain what you are trying to accomplish and is not working

Rich R · ‎12-05-2024

Agreed with @MHM Cisco World - why are you trying to configure DHCP on your management interface?

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390