11-22-2012 04:07 AM - edited 07-03-2021 11:05 PM
Hi
I am having problems with my WISM2 witch 7.2.111.3 version.
When talking to my partner, they sad it was a known BUG
CSCtr17396 Bug Details
Top of Form
WLC crash : pmalloc memory corruption | |
Symptom: Software was stopped for the following reason: Conditions: Workaround: |
11-22-2012 07:06 AM
To find out if your really hitting that bug or any bug, open up a TAC case. That will be your best bet.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
11-22-2012 12:37 PM
Do you've a core dump of this crash, if no then it is really hard to rootcause the issue.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtr17396
11-22-2012 10:56 PM
Yes a have a core dump, witch a produced to TAC. And the printout above is the answer from TAC
//Johan
11-22-2012 11:10 PM
#crash log is different from core dump. i think you've given crash log to tac and not core dump.
Management>> Techsupport>> controller crash>> "crash log"
#core dump of crash is not stored on WLC's flash, you need to setup an ext ftp server and configure the same on wlc.
Management>> Techsupport>> Core dump>> configure ftp server details. coredump is a bigger file that can't get stored on WLC's flash, it'll be stored to ext ftp server, the extension of file is .gz. if you've given this file then i hope cisco could rootcause the issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide