Question about WLC - AP - VLAN and remote branch

[Olivier Chambelant]

Hello,

I have a question.

I have two remote offices on VLAN 50 but not on same subnet. Both offices have AP flexconnect in VLAN 50.

• Office 1: 10.1.0.0 /24
• Office 2: 10.2.0.0 /24

WLC is in office 1 with IP address 10.1.0.250. Wi-Fi users in office 2 will have IP adress in 10.1.0.0 /24 or 10.2.0.0 /24 in order to have connectivity ?

Best regards.

[Sandeep Choudhary]

You can use Flexocnnect with local swicthing to put the client in diff subnet in diff location:

Check these posts:

https://wlanlessonslearned.wordpress.com/tag/flexconnect/

https://supportforums.cisco.com/document/98646/wireless-lan-flexconnect-configuration-example

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81680-hreap-modes.html

Regards

Dont forget to rate helpful posts