08-28-2020 03:04 PM - edited 07-05-2021 12:27 PM
Please note I have been given responsibility for this but no training.
1) I have a AP which does not responds to the controller. I think the IP is wrong since it doesn't respond to pings (but the others do). How do I change the IP address?
2) I can ssh into all the Aps but cannot HTTP or HTTPS to them. Note, I have a controller (one of the APs) but that really doesn't seem to have much info on it.
How do I establish web connectivity (if possible)
3) Does the AP have a config file like a switch/router? If so, how do i see it?
Thanks
08-28-2020 07:20 PM
Please provide the complete output to the following commands:
AP
sh version sh ip interface brief
sh capwap client rcb
sh log
WLC
sh sysinfo sh time
09-01-2020 05:38 AM
In the default configuration the AP will use DHCP, so make sure that the DHCP server is still working in that network. Otherwise we need the outputs that Leo has asked.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide