03-12-2020 01:00 PM - edited 07-05-2021 11:51 AM
I have some access points that were with this message
"Radio reset due to (56) Radio channel set"
They were working with DCA best, after I switched to 20MHz the problem stopped occurring.
this problem only happened with the 5GHz radio.
Has anyone seen something like this, or a bug for this case?
03-12-2020 05:11 PM
The following log is helpful for further analysis.
show inventory show flash crash show flash cores show logging
03-13-2020 06:22 AM
03-13-2020 07:21 PM
03-27-2020 11:58 AM
Hi
I made some test and I would like to share that information with you.
I changed my RF Profile 5GHz / RRM / DCA of Best to 20Mhz and after that works fine.
one thing it's strange that before the upgrade version of the WLC to 8.5.151.0 these problems didn't happen.
03-13-2020 01:38 AM
- Elaborate on your wireless environment too, standalone , controller based ,controller model(s) ,ap model(s) , and or include used software version(s) on the mentioned platform(s)
M.
03-13-2020 07:16 AM
- According to the document referenced below it could be due to flaky up-links for the AP(s)
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-3700-series/117869-technote-ap-00.html
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide