02-25-2013 03:42 AM - edited 07-03-2021 11:36 PM
Hello everyone
Running vwlc 7.3.101 and encountered a smaller issue.
When you enable / disable a SSID, all AP's reset their radio interfaces... causing everyone to drop their connection.
Is this intentional?
Thanks
02-25-2013 04:35 AM
I have never ran into that issue at all. I make changes to specific eland and that doesn't affect any other wlans nor does it glitches the ap radios.
I do this all the time too.
Sent from Cisco Technical Support iPhone App
02-25-2013 04:36 AM
APs shouldn't rest their radios upon enabling or disabling ssid from WLC.
If the AP is autonomous , then adding or removing SSID to-from the radio interface causes it reset.
attach show run-config
highlight the APs that had resetted.
---------------------------------------------------------------------------
Please Don't to rate correct answers
02-25-2013 06:21 AM
Yeap, thats what I thought, couldnt remember having the AP's resetting their interfaces when enable/disable SSID'n
I will open a TAC case
I'll post the solution when I get it
Thanks for the replies
02-25-2013 07:13 AM
Clarification question. Are you using AP groups?
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide