Reboot multiple or all access points via WLC web GUI or Cisco Prime

[josephbtyler]

Is it possible to reboot multiple or all wireless access points via the WLC web GUI or Cisco Prime at one time? If so, can it be scheduled? I would prefer to not have to reset each and every access point individually. Thanks!

[JEFFREY SESSLER]

Wouldn't "AP Image Reset" do the trick as well?  This is part of the AP image pre-download process, but as long as one doesn't issue the AP Image swap command, it should cause all the AP's to reboot on their existing code. 

[m4xi]

Hello,
you can restart directly in the GUI at the WLC.

Configuration -> Wireless -> Access Points

Select the AP you want to restart, move in the tabs to Advanced and click on the cycle button "Performs reset on the AP"


Regards,

[jtrohm]

Thank you for your response. Unfortunately, this does not accomplish the core question, which is how to perform this operation on a group of access-points without individually rebooting them using the process you described.