Relocate Building to Different Campus in PI

[Thomas McClintic]

I must be missing something obvious, but I am not able to figure out how to move a building to a different campus in PI 1.3.

Thanks in advance

From the configuration guide http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/maps.pdf

After adding a new building, you can move it from one campus to another without having to

recreate it.

Does anyone know off hand how to do this task?

[Rasika Nayanajith · Accepted solution]

Hi

It is straight forward.

First go to "Monitor -> Site Maps" & then select the building you want to move. Then choose "Move Building" option from the dropdown list & hit "Go".

Then it should ask what is the "Target Campus". Once you selet it click "OK", That's it, your building should move to the required campus. Below shows a screenshot of what I explained here.

.

Pls mark this thread as "Answered" if this is what you looking for.

HTH

Rasika

**** Pls rate all useful responses ******

[Thomas McClintic]

Wonderful, thanks. I was clicking on the building and then looking for the action.

[PERI_Admin]

I cannot find this feature in Prime Infrastructure 3.7

Was this feature removed in Site Maps (New)?

[bpierson]

Go into the old map system and look at the Hierarchy. You can move the building from one site to a different one using the drop down commands at the top. Check which building and select move buildings then it is like the process described above.

Brian