WLC5508 WLC2504 how to read "NAT External IP Address" with snmp

jmnet-cisco · ‎02-10-2021

Hello,

While is can get most information with snmpv2c about APs and Clients from the wlc's,

i am unable to locate the MIB-variable/table for the "NAT Externet IP Address" as shown on the CLI:

(Cisco Controller) >show ap config general ABC-DEF-123

Cisco AP Identifier.............................. 79
Cisco AP Name.................................... ABC-DEF-123
Country code..................................... DE  - Germany
Regulatory Domain allowed by Country............. 802.11bg:-E     802.11a:-E
AP Country code.................................. DE  - Germany
AP Regulatory Domain............................. 802.11bg:-E    802.11a:-E
Switch Port Number .............................. 13
MAC Address...................................... 38:90:a5:7c:a0:c8
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.178.20
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.178.1
NAT External IP Address.......................... 46.5.5.204:56228CAPWAP Path MTU.................................. 1453
DHCP Release Override............................ Disabled
Telnet State..................................... Globally Disabled
Ssh State........................................ Globally Disabled
[...]

Any hints welcome.

Thank you,

Jürgen.