Resetting 7921 phone

[lmrscheff]

Does anyone know the procedure for resetting the 7921 wireless phones?

[stahkaoja]

If you have totally lost connectivity with 7921G, this is the procedure:

Press ... and speakerphone buttons (located on the left and right sides of the phone) together and then power-up the phone. The phone says "Starting recovery mode. Checking firmware."

Now, you must have the USB-cable (CP-CAB-USB-7921G) and the proper drivers installed to your computer. Then you must change your computers IP-address to, for example 192.168.1.101/255.255.255.0

Use your web-browser to connect to 192.168.1.100 and from there, you can upload a new firmware (.tar file) to the phone. That process takes several minutes. After that, the phone is "factory resetted".

Hope this helps,

Sami

[migilles]

That is the method to recover the firmware and not for factory default.

For fadctory default, the method is to enter **2 when in the Settings > Phone Settings menu.