06-14-2024 04:46 AM - edited 06-14-2024 04:49 AM
Solved! Go to Solution.
07-10-2024 12:50 AM
@yaya not sure how you linked those debug messages to rogue APs?
> from our point of view, these are not harmless...
CSCwa73906 is quite clear "These messages are considered to be normal and can be ignored - they will be logged immediately after a client connects, for a very brief period. This bug commits a change to keep them from being logged by default; with this fix, they will be logged only at debugging level."
The "fix" is simply to stop logging them except when debug is enabled.
06-14-2024 04:57 AM
- FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwa73906
The bug report refers to older planforms but also states that the messages are harmless
M.
06-16-2024 05:07 PM
What version of software are you using?
06-21-2024 06:37 AM
17.9.5
07-10-2024 12:47 AM
What's the exact version running on the AP @pengus
If it's 17.9.5.47 or later 17.9.5 version (which is supposed to have the fix for CSCwa73906) then best to open a TAC case.
07-10-2024 02:27 AM
AP's version in my environment is 17.9.5.205 but i experienced this error in other versions too.
07-10-2024 06:50 AM
CSCwa73906 should have been fixed in 17.9.5.205 so best to open a TAC case if it bothers you.
But either way since these messages are cosmetic you can just ignore them.
07-10-2024 12:37 AM
same here:
iosxe 17.9.5 and a lot of our 3802 aps are shown as ROGUE APs.
checking the APs shown as rogue are ending up with the given error:
Jul 10 08:25:21 kernel: [*07/10/2024 08:25:21.0614] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:25:21 kernel: [*07/10/2024 08:25:21.0706]
Jul 10 08:28:04 kernel: [*07/10/2024 08:25:21.0707] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:28:04 kernel: [*07/10/2024 08:28:04.1992]
Jul 10 08:28:04 kernel: [*07/10/2024 08:28:04.1992] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:28:04 kernel: [*07/10/2024 08:28:04.2007]
Jul 10 08:38:12 kernel: [*07/10/2024 08:28:04.2007] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:38:12 kernel: [*07/10/2024 08:38:12.6477]
Jul 10 08:38:12 kernel: [*07/10/2024 08:38:12.6477] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:38:12 kernel: [*07/10/2024 08:38:12.6524]
Jul 10 08:38:17 kernel: [*07/10/2024 08:38:12.6524] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:38:17 kernel: [*07/10/2024 08:38:17.0543]
Jul 10 08:38:17 kernel: [*07/10/2024 08:38:17.0543] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:38:17 kernel: [*07/10/2024 08:38:17.0557]
Jul 10 08:39:07 kernel: [*07/10/2024 08:38:17.0557] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:39:07 kernel: [*07/10/2024 08:39:07.9174]
Jul 10 08:39:07 kernel: [*07/10/2024 08:39:07.9174] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:39:07 kernel: [*07/10/2024 08:39:07.9214]
Jul 10 08:39:17 kernel: [*07/10/2024 08:39:07.9215] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:39:17 kernel: [*07/10/2024 08:39:17.2928]
Jul 10 08:39:17 kernel: [*07/10/2024 08:39:17.2928] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 08:39:17 kernel: [*07/10/2024 08:39:17.2965]
Jul 10 09:07:55 kernel: [*07/10/2024 08:39:17.2965] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 09:07:55 kernel: [*07/10/2024 09:07:55.0917]
Jul 10 09:07:55 kernel: [*07/10/2024 09:07:55.0918] *** RSN ERROR: Received a data frame when no keys are plumbed
Jul 10 09:07:55 kernel: [*07/10/2024 09:07:55.0948]
from our point of view, these are not harmless...
at least Catalyst Center showing these as ROGUE APs and calculating channel interference for these
07-10-2024 12:50 AM
@yaya not sure how you linked those debug messages to rogue APs?
> from our point of view, these are not harmless...
CSCwa73906 is quite clear "These messages are considered to be normal and can be ignored - they will be logged immediately after a client connects, for a very brief period. This bug commits a change to keep them from being logged by default; with this fix, they will be logged only at debugging level."
The "fix" is simply to stop logging them except when debug is enabled.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide