Rssi low check

[hs08]

Hello,

I enabled RSSI low check for 5Ghz and 2.4Ghz, for 5Ghz set to -67 and for 2.4 set to -65

but why on the client i can see there are still many client with rssi lower than -65 and 67?

[Mark Elsen]

             - You don't mention controller type and software version currently using (=?)

 M.

[hs08]

Hi @Mark Elsen 

Currently i use WLC 2504 with 8.5.182.0 software version

[Mark Elsen]

 - As per https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html   
                  Check it out with : https://software.cisco.com/download/specialrelease/2702eede2b47a5c3bb40795bbe836af6

  M.

[hs08]

What that mean? Given url only say about recommended software version

[Mark Elsen]

 - The latest advisory for  your controller type as mentioned in the document being :
           https://software.cisco.com/download/specialrelease/2702eede2b47a5c3bb40795bbe836af6

    is always advised on the older aireos controllers these days as they are being phased out and TAC support is diminishing  (support fading). Check if that can help for your issue too.
        

 M.