03-30-2017 01:05 AM - edited 07-05-2021 06:46 AM
dear ,
i have controller cisco 5508 with 30 access point AIR-AP1852E-K-K9 and i have 2 problem :
1- in SSID security L2 when i configured as WPA+WPA2 IPs not distribute to client nut if make it non the client take IPs . why ?
2- android and win labtop can browsing internet but ios iphone and ipad not browsing . why ??
can i found any help .
thanks
03-30-2017 09:04 AM
Hi,
Have you configured any DNS parameters in the controller? If not try manually putting the default DNS details in the device itself, it might solve the issue.
04-01-2017 10:43 PM
04-02-2017 01:25 AM
Hi ,
Have you enabled Fast SSID change? If not enable it and doing the vice versa, Also check the IOS version the APPLE devices are using, and update it to the latest that is 10.3.
Lastly remove all the DNS config on the controller, and run it as a default config, also try to remove all the layer 2 encryption and see if its able to communicate to internet on an open-encryption.
try sending the Network Topology and the interface on fig you've done.
thanks,
Zee
04-02-2017 07:17 AM
Zee is right... try an open SSID first and see if that works or not. Alsoninnoticed your code version. That is one of the worst code versions out there, the 8.1. You should look at upgrading to 8.2.151.0 also. Create a test SSID and set it to open. Don't make any other changes to the wlan configuration and see if the devices could connect.
-Scott
*** Please rate helpful posts ***
04-02-2017 09:48 PM
dear , when i open SSID its connect to network and browsing internet android , windows laptop except ios not browsing ..
i will try to upgrade to see ...
04-02-2017 10:00 PM
That's seems to be an issue with the code then. Keep us updated if the upgrade does help.
-Scott
*** Please rate helpful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide