05-04-2021 02:34 AM - edited 07-05-2021 01:15 PM
Hi everyone, all the access points I monitor are connected to a wlc. They managed to set snmp to the WLC but I can't set them to the access points. Is anyone capable of being able to help me? Thank you
Solved! Go to Solution.
05-04-2021 04:56 AM
Hi,
As per my knowledge, If the AP is in CAPWAP mode, you cannot directly poll the AP using SNMP. You have to poll the controller to get all the information about the AP.
Regards
Dont forget to arte helpful posts
05-04-2021 04:56 AM
Hi,
As per my knowledge, If the AP is in CAPWAP mode, you cannot directly poll the AP using SNMP. You have to poll the controller to get all the information about the AP.
Regards
Dont forget to arte helpful posts
05-04-2021 05:15 AM
hi Sandeep thanks for the answer .
05-04-2021 08:35 AM
Here's the list of related MIB
SNMP Object Navigator
https://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.513
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide