08-06-2022 11:01 PM - edited 08-07-2022 09:23 AM
1) Can we configure AP AIR-CAP370I-E-K9 (atonomous)t o make the user from the organization to authrize automaticaly by MAC filtering without provide any credential.? how ?
2) (atonomous) can we create guest access with limited time access. how ?
I dont have any WLC.
08-07-2022 09:46 AM - edited 08-08-2022 03:11 PM
I've never tried to do anything like that or seen it done on autonomous.
Look through the config guide and see what you can come up with:
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/atnms-ap-8x/configuration/guide/cg-book.html
08-08-2022 09:46 AM
Refer below for guest access using autonomous AP
MAC filtering as a security measure is not recommended. anyone can spoof a MAC address very easily
HTH
Rasika
*** Pls rate all useful responses ***
08-08-2022 12:40 PM
Thanks Mr.Rasika,
is there any guide to configure the same through GUI instead of CLI. i am not an IT expert. i am very rookie to this.
08-08-2022 01:17 PM
With Autonomous AP, sometimes GUI may be a bit flaky. I haven't seen any recent documentation from Cisco for it as Autonomous mode does not continue to support it. (in favor of Mobility Express/EWC mode)
I would simply get into CLI (SSH or console) & try that configuration guide
HTH
Rasika
08-08-2022 09:50 AM
Nice one @Rasika Nayanajith
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide