Setup CW-240 AP

[at@ps]

Hey Folks,

I have a RADIUS Server, and I'm trying to connect a CW-240 Access Point.
The settings at RADIUS Server, is configured to add users to specific VLAN based on their Identity.

Is that supported at this AP?

Please, provide me with any useful resources to configure it (if it's supported).

Many thanks,

[Mark Elsen]

 - This AP does not support dynamic vlan assignment with Radius (which is basically a controller feature) . 

 M.

[at@ps]

Just to make sure I got things correctly.

So, this AP supports static VALN only?

Also, if we need to configure Dynamic VLANs, we need a controller that communicate with this AP to configure Dynamic VALNs, don't we? 

If so, please, advice which controller is needed in this case! 
Thanks,

[Mark Elsen]

 - You need a controller based solution , indeed , but these models can not work with  a controller , you need higher level business access point models for that check : https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
You can for instance choose access point according to https://www.cisco.com/c/en/us/products/wireless/access-point-controller-selector.html 

 M.