Single Wireless Controller - 2 Diff networks - Page 2

khan300 · ‎12-29-2014

Hi,

I have a requirement where I have 2 Physically separated networks. I want to use 1 controller and connect both the networks to this 1 controller with 2 diff SSID's.

Is that even possible? As far as I know we can connect 2 diff networks as long as they are connected through WAN or in diff VLANS via H-REAP (Flexconnect). But these network are not even connected via WAN.

If its not possible that what could be a solution to make it possible.

Thanks

khan300 · ‎02-09-2015

Can we just allow the WLC management address to pass through the firewall ? If we do that i think the problem will be solved.

George Stefanick · ‎02-10-2015

You will also need to allow the wireless client traffic to pass through as well. It will be dumped on the wlc on the one side ..

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

khan300 · ‎02-17-2015

Please check out the new Desing, Previously both networks were separated now we have a switch in between the 2 networks (guest & business). Should the VLANS be configured on the NEW switch or should it just carry the VLANS from the 2 networks which are separated by a Firewall.