cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
703
Views
0
Helpful
1
Replies

SSID's on different channel?

tim_buster
Level 1
Level 1

Hi all, we have multiple WLANS/SSID's on our controller, which are broadcasting on all AP's.

Is it possible to configure the AP's to broadcast the SSID's on different channels or is this not necessary/usefull.

Do the 2 SSID's interfere?

Thanks in advance!

Tim

1 Reply 1

Nicolas Darchis
Cisco Employee
Cisco Employee

An AP servicing ssid on 2 channels at the same time would require 2 radios. It's like a walkie-talkie that cannot listen to 2 channels at the same time, you have to select one.

So APs usually have a radio in the 5ghz band and one in the 2.4ghz band. So you can have the SSIDs both on 2 and 5ghz bands or one band only.

But you cannot spread the SSIDs between channel of a same band.

Nicolas

Review Cisco Networking products for a $25 gift card