02-17-2011 05:10 AM - edited 07-03-2021 07:50 PM
I have a problem I get it but not okay for wireless SSID in verschillden subnet's turn can not get ip address to know, I would not share ip address to do, what do I miss who can help me otherwise I can not connect SSID
because I needed for my studies, otherwise I'm not geslaagt
One ssid
subnet 10.10.10.0 255.255.240.0
vlan 2
two
subnet 30.30.30.0 255.255.240.0
vlan 3
02-28-2011 12:23 PM
Hey,
I don't really understand your problem..
You speak german? You can send me a mail..
Still necessary to solve the problem?
-Sebastian
02-28-2011 12:45 PM
I have on my wireless router cisco 800 3 SSID made to different IP addresses that would get would be, so if you connect ssid
you get the 255.255.255.240 subnet 20.20.20.0 and another connecting to 30.30.30.0 255.255.55.240 ssid?
03-01-2011 12:19 AM
OK, let me try to help you..
Wireless Interface example VLAN2
interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache no cdp enable bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled |
Ethernet interface example VLAN 2
interface FastEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled |
BVI Example
interface BVI 2
IP Address XX.XX.XX.XX 255.255.255.0
SSID Example, depends on what you would like to use...
ssid TEST
vlan 2
authentication open
regards,
Sebastian
03-01-2011 12:49 AM
I've even tried one but when I connect to SSID I get no ip address to gekent, how can you solve this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide