SSID set on specific access points

[rramlal]

Hi All,

I have an installation of 1 wireless controller at a head office and some access points distributed to two locations. One of these locations has requested a guest wireless access. Please advise if i can setup the guest wireless ssid to only be projected from the aps in one location?

I would not like to have both locations see the SSID.

Thanks

[Scott Fella]

Yes you can. You just need to use AP Groups which allows you to specify what SSID and interface you want that ap to use. Then if you want to drop off the traffic locally you can setup the APs in FlexConnect mode.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

AP Groups
https://supportforums.cisco.com/docs/DOC-19033

FlexConnect
https://supportforums.cisco.com/docs/DOC-24082

Sent from Cisco Technical Support iPhone App