01-23-2018 04:03 AM - edited 07-05-2021 08:09 AM
Hello,
I have two APs adopted on WLC2504 - AP1562-I and AP1562-D.
The WLC is on the latest software version 8.5.110.0, as well as both APs.
My problem is - if I create a SSID with WEP128 as a security policy it simply doesn't broadcast!
When I change WEP128 to WPA2-PSK it's available and visible immediately.
Needless to say, in both cases both 'Broadcast SSID' and 'Status' checkboxes are checked.
Wasn't able to find a similar issue reported so I decided to ask this fine community here.
If anyone has any clue, please help! I'd be more than glad to supply any of you with any further info you may require...
Thanks!
Darko
Solved! Go to Solution.
01-23-2018 04:18 AM
Hi,
Static WEP not supported on 1560 AP.
here is the release notes :
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn85mr1.html
Regards
Dont forget to rate helpful posts
01-23-2018 04:18 AM
Hi,
Static WEP not supported on 1560 AP.
here is the release notes :
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn85mr1.html
Regards
Dont forget to rate helpful posts
01-23-2018 04:25 AM
01-23-2018 04:27 AM
I'm glad it helped.
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide