cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1485
Views
5
Helpful
5
Replies

Standby Console Disable

waqarsalim
Community Member

I've a cisco wireless catalyst Model: c9115axi-d

I'm not able to enter in config mode because of console standby mode is enabled

i also tried it with web that is also disabled

Also not able to connect wifi also disabled

Help me with solution how to disable it

5 Replies 5

Mark Elsen
Hall of Fame
Hall of Fame

 

          - Is this some kind of dual-ha setup , if so , configure on active device (?)
 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

It's Wireless Router/Access Point Model C9115AXI-D

I'm Not able to enter in Configuration mode

somehow it's stby is enabled

even I'm not able to reset it

 

 

 

          - Can you provide screenshot  ?

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

For lightweight AP managed by controller you won’t  be able to enter config mode.

share show version, if you are able to run, also try command debug capwap console cli

-hope this helps-

Rich R
VIP
VIP

- Turn off AP power

- Connect console cable with terminal open on PC

- Turn on the AP and capture all the logs on the console

Attach and share the log as .txt file here.

------------------------------
Please click Helpful if this post helped you and Accept as Solution if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card