trunk link in aironet 1300

[Jayesh Prajapati]

Sir,

see attached document.in this scenario i want pass my three VLAN information throght aironet 1300. is that possibale ?

please tell me how to done it ?

[m.hierling]

Hi,

Yes it is. You need to configure Ethernet and Radiointerfaces with bridge-group and a SSID for that vlan.

dot11 vlan-name hfm vlan 207

dot11 ssid VLAN207

vlan 207

authentication open

authentication key-management wpa

wpa-psk ascii password

interface Dot11Radio0

encryption vlan 207 mode ciphers aes-ccm tkip

ssid VLAN207

interface Dot11Radio0.207

encapsulation dot1Q 207

no ip route-cache

bridge-group 207

interface FastEthernet0.207

encapsulation dot1Q 207

no ip route-cache

bridge-group 207

thats it, basically. be aware that bvi1 (management) has to be in native vlan, asume vlan 42 is your management:

interface Dot11Radio0.42

encapsulation dot1Q 42 native

regards Martin