I have a UC520, two ESW-500 switches and 26 SPA502G phones. Half of the phones are in one building and the other half are in an adjascent building that is connected with a Aironet 1310 Bridge.
The bridge is set on the side with the UC520 and one ESW Switch to ROOT, while the recieiving side is set to NON-ROOT.
My phones work fine on both switches when the switches are hard wired together, but as soon as they are connected through the bridge I lose phone connection. I should say that I have network connectivty through the switch on the NON-ROOT side, and can ping the UC520 and the ESW, but the phone cannot connect.
I am assuming it has something to do with the VLANs. The network is operating over VLAN 1 and the Voice System is over VLAN 100. However, when I set up VLANS on the bridge, they cease communicating.
Any ideas?