06-22-2021 06:51 AM - edited 07-02-2021 09:35 PM
As the title says.
We've created the wireless network, which we can connect to and, I can ping the newly assigned IP address.
however, regardless of the device/method we use to try and access the GUI we either get (on mobile) Primary AP is unreachable or a connection un reachable on a web browser.
anyone have any ideas what is going on?
06-22-2021 08:40 AM
- Could you try to access the GUI from a wired connection ?
M.
06-22-2021 09:01 AM - edited 06-22-2021 09:03 AM
Hi @marce1000
same problem with a wired connection.
also, i can find the AP using Findit on another cisco device attached to the network.
06-22-2021 09:34 AM
- Try to fetch the page with wget , post results here ( https://linux.die.net/man/1/wget )
M.
06-23-2021 12:25 AM
@marce1000 this is what I get:
--2021-06-23 08:22:52-- https://192.168.***.***/
Connecting to 192.168.***.***:443... failed: Unknown error.
Retrying.
--2021-06-23 08:23:14-- (try: 2) https://192.168.***.***/
Connecting to 192.168.***.***:443... failed: Unknown error.
Retrying.
It only occurs after I change the IP address....?
06-23-2021 12:46 AM
- Try to run wget with debug option(s) turned on , and verbose mode too.
M.
06-23-2021 12:58 AM
EBUG output created by Wget 1.21.1 on mingw32.
Reading HSTS entries from C:\WINDOWS\system32/.wget-hsts
URI encoding = 'CP1252'
converted 'https://192.168.***.***' (CP1252) -> 'https://192.168.***.***' (UTF-8)
URI encoding = 'CP1252'
Enqueuing https://192.168.***.***/ at depth 0
Queue count 1, maxcount 1.
[IRI Enqueuing 'https://192.168.***.***/' with 'CP1252'
Dequeuing https://192.168.1.232/ at depth 0
Queue count 0, maxcount 1.
converted 'https://192.168.***.***/' (CP1252) -> 'https://192.168.***.***/' (UTF-8)
Converted file name '192.168.***.***/index.html' (UTF-8) -> '192.168.***.***/index.html' (CP1252)
--2021-06-23 08:53:27-- https://192.168.***.***/
seconds 0.00, Connecting to 192.168.1.232:443... seconds 0.00, failed: Unknown error.
Releasing 0x0000000002d0cbe0 (new refcount 0).
Deleting unused 0x0000000002d0cbe0.
or for HTTP
DEBUG output created by Wget 1.21.1 on mingw32.
Reading HSTS entries from C:\WINDOWS\system32/.wget-hsts
URI encoding = 'CP1252'
converted 'http://192.168.***.***' (CP1252) -> 'http://192.168.***.***' (UTF-8)
URI encoding = 'CP1252'
Enqueuing http://192.168.***.***/ at depth 0
Queue count 1, maxcount 1.
[IRI Enqueuing 'http://192.168.***.***/' with 'CP1252'
Dequeuing http://192.168.***.***/ at depth 0
Queue count 0, maxcount 1.
converted 'http://192.168.***.***/' (CP1252) -> 'http://192.168.***.***/' (UTF-8)
Converted file name '192.168.***.***/index.html' (UTF-8) -> '192.168.***.***/index.html' (CP1252)
--2021-06-23 08:56:27-- http://192.168.***.***/
seconds 0.00, Connecting to 192.168.***.***:80... seconds 0.00, failed: Unknown error.
Releasing 0x00000000001da3b0 (new refcount 0).
Deleting unused 0x00000000001da3b0.
06-23-2021 05:02 AM
- Also use -S and or --server-response , in a next trial
M.
06-23-2021 05:11 AM
DEBUG output created by Wget 1.21.1 on mingw32.
Reading HSTS entries from C:\WINDOWS\system32/.wget-hsts
URI encoding = 'CP1252'
converted 'http://192.168.***.***' (CP1252) -> 'http://192.168.***.***' (UTF-8)
URI encoding = 'CP1252'
Enqueuing http://192.168.***.***/ at depth 0
Queue count 1, maxcount 1.
[IRI Enqueuing 'http://192.168.***.***/' with 'CP1252'
Dequeuing http://192.168.***.***/ at depth 0
Queue count 0, maxcount 1.
converted 'http://192.168.***.***/' (CP1252) -> 'http://192.168.***.***/' (UTF-8)
Converted file name '192.168.***.***/index.html' (UTF-8) -> '192.168.***.***/index.html' (CP1252)
--2021-06-23 13:07:14-- http://192.168.***.***/
seconds 0.00, Connecting to 192.168.***.***:80... seconds 0.00, failed: Unknown error.
Releasing 0x000000000136a250 (new refcount 0).
Deleting unused 0x000000000136a250.
Retrying.
--2021-06-23 13:07:36-- (try: 2) http://192.168.***.***/
seconds 0.00, Connecting to 192.168.***.***:80... seconds 0.00, failed: Unknown error.
Releasing 0x000000000136a220 (new refcount 0).
Deleting unused 0x000000000136a220.
Retrying.
--2021-06-23 13:07:59-- (try: 3) http://192.168.***.***/
seconds 0.00, Connecting to 192.168.***.***:80... seconds 0.00, failed: Unknown error.
Releasing 0x000000000136a2e0 (new refcount 0).
Deleting unused 0x000000000136a2e0.
Retrying.
--2021-06-23 13:08:23-- (try: 4) http://192.168.***.***/
seconds 0.00, Connecting to 192.168.***.***:80... seconds 0.00, failed: Unknown error.
Releasing 0x000000000136a1f0 (new refcount 0).
Deleting unused 0x000000000136a1f0.
Retrying.
06-23-2021 05:31 AM
- Please post a screenshot , as the error is seen , when using the browser.
M.
06-23-2021 05:39 AM
06-23-2021 07:17 AM
also, if it helps. the AP LED is flashing red, amber green.
06-23-2021 09:56 AM
Just out of curiosity, when you changed the ip address, did you try to reboot the ap?
06-23-2021 12:21 PM
No, I didn't have the chance to. After the IP change it won't reconnect.
I left it overnight thinking it might sort itself out. Which it didn't. So I tried pulling the power and still the same issue.
It's working as an AP, but just no access to the GUI.
06-24-2021 03:30 AM
Probably your only option at this point is to reset to factoy default, make sure you're on latest firmware, then try again. Sounds like the config has got corrupted when you changed the IP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide