unable to access WLC GUI

[shawntls82]

Hi ,

We have 2 unit of WiSM2 deployed, one at Core switch1 and the other unit at Core switch2, these 2 units are belong to same management subnet for example 10.1.1.x 255.255.254.0

we are able to ping both units but only able to get into the GUI of the first unit, let's say 10.1.1.1 but not able to get into GUI for 10.1.1.2

we have checked the firewall and it's not blocking.

any idea on how to access the 2nd unit GUI or fix the issue?

Thanks.

[George Stefanick]

A few things ..

1. If your second controller is in HA mode you wont be able to see it .

2. Were you trying to access the WLC over wireless? If managment over wireless is disbaled you wont be able to access it ..

try to log into the wlc from the wired

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."