01-23-2018 07:56 PM - edited 07-05-2021 08:09 AM
I bought a 1850e and configured it with a new Cisco Mobility Express deployment. However I am unable to click the login button management interface. It just doesn't function or recognize a click. I've tried different browsers and computers. I searched the forums but couldn't find a resolution.
It also doesn't appear to say "Wireless LAN Controller"it says "OfficeExtend Access Point.
I just found that odd.
Any ideas? Thanks!
Solved! Go to Solution.
01-23-2018 09:54 PM - edited 01-23-2018 09:55 PM
Thanks! I found the issue. I had erroneously and unknowingly set the AP and the virtual controller to have the same IP address. This reddit thread gave me a clue. They are different values now.
A factory reset (which took many attempts for some reason) and I set the IPs properly and I am good to go.
01-23-2018 08:38 PM
01-23-2018 09:54 PM - edited 01-23-2018 09:55 PM
Thanks! I found the issue. I had erroneously and unknowingly set the AP and the virtual controller to have the same IP address. This reddit thread gave me a clue. They are different values now.
A factory reset (which took many attempts for some reason) and I set the IPs properly and I am good to go.
01-23-2018 10:21 PM
08-28-2020 08:59 PM
Hi Myself also facing the same problem. also unable to configure DHCP for clients.
Please guide me to configure in a proper way. tried many times reset and configure via web, app and cli still facing the same problem.
my mail id "raajesh1782@gmail.com"
device mode " Cisco AIR-AP1852i-D-K9"
Regards
Rajesh I
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide